imgtab

Safety Relief Valve

The Seetru range of safety valves for compressed air and gas are compact, highly efficient and incorporate the exclusive Tutchtite– seal technology for repeatable bubble-tight sealing performance: designed for applications including air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250°C. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, EAC customs union (Russia, Belarus and Kazakhstan), the Canadian CRN and compliant with the requirements of the Pressure Equipment Directive 97/23/EC (CE marked).

Specification Link

imgtab
imgtab

Seetru Type 329 Bronzr or Stainless Steel Enclosed Discharge Safety Relief Valves for Compressed Air, Gases, cryogenic & liquefied gas

Safety valves with either Bronze or Stainless Steel body with inlet threaded connections of 3/8'' to 3/4'' for pressures from 768 to 5365 PSIG. Designed for applications ioncluding: Air/Gas systems • Natural Gas • CNG/LNG • Pressure vessels • Medical gases • Technical Gases • CO2 refrigeration • Ammonia refrigeration (Stainless steel) • Cryogenic applications • Liquefied gases.

Technical Specifications

Specification Link

imgtab
imgtab

Seetru Type 636 / 631 Safety Relief Valves for Compressed Air & Gases

The Seetru range of safety valves for compressed air and gas are compact, highly efficient and incorporate the exclusive Tutchtite– seal technology for repeatable bubble-tight sealing performance: designed for applications including air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. Inlet connections: 3/8” to 2” • Temperature: -40°C to +200°C (depending on seal material) • Pressure range: 0.32 to 55.2 barg ASME, PED, TUV and CRN approved Connections: NPT, BSPP & BSPT

Technical Specifications

Specification Link

imgtab
imgtab

LGS Safety Relief Valves

LGS Safety Relief Valves from Stock - Multi-purpose valve suitable for Liquid, Gas and Steam applications. All of our valves are available from DN15 to DN50 (1/2" to 2" BSP female connections), Pressure range is 0.2 to 24 bar g. (depending on seal and duty)

Specification Link

imgtab
imgtab

Bestobell Cryogenic Safety Relief Valve Series CW

A range of high quality Bronze or Stainless Steel relief valves designed to comply with ISO 4126 (Safety Valves General Requirement), Ad-Merkblatt A2 (Safety Devices against Excess Pressure) and TUV requirements. Designed to protect piping, cryogenic static storage, and trailer tanks against damage from excessive over-pressure.

Technical Specifications

Specification Link

imgtab
imgtab

Change Over Valve (Safety Valve)

This valve is used if a plant shutdown is impossible or undesirable for process engineering or commercial reasons. With change-over valves it is possible to switch over between parallel safety valves without interrupting operation, so that maintenance work can be carried out on each safety valve in turn.

Specification Link

imgtab
imgtab

Bestobell Cryogenic Thermal Relief Valve - Series CVF

A compact cryogenic relief valve designed to prevent damage to piping and equipment caused by the expansion of liquefied gases.

Technical Specifications

Specification Link

imgtab
imgtab

Bestobell Cryogenic Bronze Safety Relief Valve Series CW

A range of high quality Bronze relief valves designed to comply with ISO 4126 (Safety Valves General Requirement), Ad-Merkblatt A2 (Safety Devices against Excess Pressure) and TUV requirements. They are eminently suited to the protection of static and road going cryogenic storage tanks against damaging over pressure. Nozzle 10 - 20 (3/8” - ¾”)

Technical Specifications

Specification Link

imgtab
imgtab

Bestobell Cryogenic Stainless Steel Safety Relief Valve - Series CWT

A range of high quality Stainless Steel relief valves designed to comply with ISO 4126 (Safety Valves General Requirement), Ad-Merkblatt A2 (Safety Devices against Excess Pressure) and TUV requirements. They are eminently suited to the protection of static and road going cryogenic storage tanks against damaging over pressure. Nozzle 10 - 20 (3/8” - ¾”)

Technical Specifications

Specification Link

imgtab
imgtab

Safety Relief Valve Testing Equipment - Compu-test™

Seetru Compu-test™ is a comprehensive computerized safety valve diagnostic system add-on for conventional safety valve test benches. Using the Compu-test™ system enables objective diagnostic analysis of the critical assessment criteria for safety valves, namely:- Set Pressure, Seetru Condition Rating® and Bubble Leak Rate. The Compu-test™ system can be used in either manual or automatic analysis modes. In automatic mode the Compu-test™ system automatically evaluates all the key diagnostic parameters extremely quickly and objectively, the user can also carry out the same evaluation entirely in manual mode. In either mode it is fast and simple to use. Experienced and inexperienced safety valve technicians will find the Compu-test™ system intuitive and easy to use.

Specification Link

imgtab
imgtab

Safety Relief Valve Testing Equipment - Quicktester™

This compact, light weight and portable design is very robust and able to meet the demands of a busy maintenance workshop or mobile operation. The Quicktester™ can be used with plant generated air supplies or with mobile bottled gas. This test bench is supplied with a range of adaptors allowing connection between 1/4" to 1" BSP as standard, additional adaptors are available increasing the connection sizes up to 2" BSP. The Quicktester™ is also available with NPT connection adaptors on request.

Specification Link

imgtab