imgtab

Bestobell Products for the Food & Beverage industries

Products dedicated for the food and beverage market

Technical Specifications

Specification Link

imgtab
imgtab

Sanitary Pressure Regulator FB6C

The FB6C Series sanitary pressure regulator is designed to regulate pressure in systems requiring the maintenance of sanitary conditions. The FB6C operates by sensing pressure under the diaphragm on the downstream side of the seat. As the downstream pressure approaches the setpoint, the force caused by the pressure acting on the diaphragm overcomes the force of the range spring, and the plug begins to move toward closed. This reduces the downstream pressure and maintains the set point. If the pressure underneath the diaphragm begins to fall, the spring forces the plug to move down towards open, to allow the setpoint to be maintained.

Technical Specifications

Specification Link

imgtab
imgtab

Steriflow FB5C Series Sanitary Back Pressure Regulator

The FB5C operates by sensing the inlet pressure, or back pressure, beneath the diaphragm, as flow enters from inlet port on the side. As the back pressure exceeds the setpoint, the diaphragm force compresses the range spring permitting the stem to move from the seat toward the open position. As the flow increases, the back pressure is relieved and the spring and diaphragm relax, allowing the stem to return to the normally closed position.

Technical Specifications

Specification Link

imgtab
imgtab

Steriflow FB6903 Series Sanitary Check Valves

3A Approved Check Valve. Sizes: 1/2'' to 4'' Pressure rating 140 psi

Technical Specifications

Specification Link

imgtab
imgtab

Steriflow FBCV-OR Series Sanitary Control Valves

The FBCV O-Ring Series is designed to meet the rigid specifications for sanitary process control valves for customers who prefer an O-ring style stem seal. This valve series is suitable for a wide variety of applications in the cosmetic, dairy and food and beverage industries. Conforming to 3A guidelines, the FBCV is ideally suited for a wide range of flowing media in both the utility and process areas of sanitary systems.

Technical Specifications

Specification Link

imgtab
imgtab

SteriFlow FB7904 Series Sanitary Butterfly Valves

The FB7904 Series sanitary butterfly valve consists of a round, split stainless steel body and a stainless steel disc which is positioned in the center of the pipe. The disc (butterfly) has rods on the top and bottom that position the disk in the body and attach to a handle or actuator on the outside of the valve. Turning the actuator/handle turns the disc either parallel or perpendicular to the flow. In sizes from 1/2? (DN15) through 4? (DN100) Pressure ratings up to 145 psi (10 bar) Internal finish 32 Ra Lockable handle prevents accidental opening or closing of valve

Technical Specifications

Specification Link

imgtab
imgtab

SteriFlow FB8905 Series Cavity-Filled Ball Valves

The FB8905 Series is designed specifically for food and beverage applications. It has cavity filled seats and tri-clamp end connections to minimize where media can collect. The inner diameter of the end connections is the same as the ID of the ball, ensuring no obstruction of flow from inlet to outlet. 3A approved In sizes from 1/2? (DN15) through 4? (DN100) with a true tube bore design, to provide unobstructed flow and better drainage Pressure ratings up to 1000 psi (69 bar) for 1/2? – 2?; and 800 psi (55 bar) for 2-1/2? – 4? PTFE cavity filler seats

Technical Specifications

Specification Link

imgtab
imgtab

FBCPM Series Sanitary Air Loaded Pressure and Back Pressure Regulators

The FB5CPM (inlet) and FB6CPM (outlet) are air loaded sanitary constant pressure modulating valves, designed to allow the user to change set-points remotely via a cabinet or panel mounted air regulator, or through a distributed control system or PLC, using an I-P transducer. The CPM valve is an ideal choice for automating and maintaining constant pressure set points on the inlet side of the valve for control operations, whether they are process set points or points to fully open the valve for rinse, CIP or SIP. The valve is preferred in HTST/UHT Pasteurization, after Heat Exchangers, Separator equipment, bottling lines, etc.

Video Link

Technical Specifications

Specification Link

imgtab
imgtab

Bestobell PR3G Series Pressure Regulator

The PR3G is a hard seated pressure reducing and regulating valve suitable for steam applications with supply pressures up to 300 psig (20,7 bar). The PR3G offers exceptional performance, easy in-line maintenance, and heavy duty construction for reliable, long-term operation.

Technical Specifications

Specification Link

imgtab