Sterlco® Condensate Return Pumps set new standards of performance. Reliable and efficient, each unit features heavy gauge, 3/16" steel receivers for long operating life. In addition, 3450 RPM motors assure maximum efficiency while maintaining minimum motor horsepower. Available in a wide range of sizes, these U.S. made pumps have just the right accessories and options to meet your unique needs.
Sterlco® Condensate Return Pumps set new standards of performance. Reliable and efficient, each unit features heavy-duty cast iron receivers for long operating life. In addition, 3450 RPM motors assure maximum efficiency while maintaining minimum motor horsepower. Available in a wide range of sizes, these U.S. made pumps have just the right accessories and options to meet your unique needs.
Sterlco® Condensate Return Pumps set new standards of performance. Reliable and efficient, each unit features heavy gauge, 3/16" stainless steel receivers for long operating life. In addition, 3450 RPM motors assure maximum efficiency while maintaining minimum motor horsepower. Available in a wide range of sizes, these U.S. made pumps have just the right accessories and options to meet your unique needs.
Sterlco® atmospherically vented condensate tanks are designed for pumping hot condensate throughout the steam system. The 4600 Series steel unit is designed to suit many applications. Tanks sizes range from 8-714 gallons. Additionally, this unit can be paired with a Sterlco® K-series 2? NPSH Pump. Sterlco® K-series 2ft NPSH Pumps are designed to pump hot condensate up to 212° F. These pumps are equipped with a stainless steel impeller and inducer to assure long operating life. Customizable tanks and specialty pump options are available.
Sterlco Retrofit Pump Adapter Kits allow for easy replacement and mounting a Sterling Pump to virtually any tank. The Retrofit Pump Adapter Kits use two gaskets and one seal for all of our pumps. Sterlco can provide kits for mounting Sterlco Pumps to Hoffman, Domestic, Shipco, Skidmore, Aurora, Paco, and Mepco Receivers. With the Sterling Retrofit Adapter Kit, you can stock Sterlco Pumps and mount them to almost any tank.
Sterlco® atmospherically vented condensate tanks are designed for pumping hot condensate throughout the steam system. The 4700 Series cast iron unit is designed to suit many applications. Tank sizes range from 6-120 Gallons. Additionally, this unit can be paired with a Sterlco® K-series 2' NPSH Pump. Sterlco® K-series 2? NPSH Pumps are designed to pump hot condensate up to 212° F. These pumps are equipped with a stainless steel impeller and inducer to assure long operating life. Customizable tanks and specialty pump options are available.
Sterlco® atmospherically vented condensate tanks are designed for pumping hot condensate throughout the steam system. The 4800 Series stainless steel unit is designed for wash down duty, sterilization, and corrosive environment applications. Tank sizes range from 8-714 gallons. Additionally, this unit can be paired with a Sterlco® K-series 2ft NPSH Pump. Sterlco® K-series 2? NPSH Pumps are designed to pump hot condensate up to 212° F. These pumps are equipped with a stainless steel impeller and inducer to assure long
Steam Control Products' new motor control panel offers a reduced size for use in smaller areas, with fewer components to replace and a 25% lower cost than comparable NEMA-rated control panels. The panel uses a Motor Circuit Protector (MCP) which supplies the same functions as fuses, starter and overload protection all in one unit, eliminating the need for six different components. The MCP meets all codes for inspection for both United States and European customers. The panel can also be remote mounted to save on valuable space.
Heavy Cast Iron pump housing and brackets assures rigidity and long life. The New SterlSeal features the ultimate in ceramic technology for exceptional long life. The Sterlco G Series Centrifugal Pump is designed so that the motor shaft will not be exposed to water. Provisions for a seal flush or vent is provided. The pump is closed coupled to a 3450-RPM, (open drip proof, totally enclosed or explosion proof.) The pump allows the motor and impeller to be removed without disturbing the piping connections. The SterlSeal runs on the bronze impeller hub, the motor shaft is literally outside of the pump. Consequently, the shaft is not exposed to corrosion by condensate. Rated for temperatures up to 250oF.
The J Series Centrifugal Pumps offer outstanding combinations of pressures and gallonage. Unique design features make it virtually impossible to create overload conditions. The Sterlco J Series Centrifugal Pump is designed so the motor shaft will not be exposed to water. Provisions for seal flush or vent is provided. The pump is closed-coupled to a 3450-RPM, (open drip proof, totally enclosed or explosion proof). The impeller is brass for long life. Efficient design provides maximum capacity, minimum motor load. The SterlSeal runs on the bronze impeller hub, the motor shaft is literally outside of the pump. Consequently, the shaft is not exposed to corrosion by condensate. Rated for temperatures up to 250oF.
The Sterlco® K Series 2’ NPSH Pump is designed to pump hot condensate up to 212° F on elevated tank units. If a steam trap fails in the system, this unit will continue to operate up to 12° higher than standard units. The added inducer increases vapor pressure and prevents the whole system failing from pump cavitation. Stainless steel construction on the impeller and inducer lengthens the life of the pump and offers supreme corrosion resistance. The K Series pump is energy efficient and will reduce total cost of ownership. It is engineered to fit current Sterlco® boiler feed and condensate units, but will also be a drop in replacement for existing Sterlco® units or competitive models.
Energy efficient design, proven performance and right size for your application. Sterlco Boiler Feed Pumps set new standards of performance. Reliable and efficient, each unit features 6 gauge steel receivers for long operating life. In addition, 3450-RPM motors assure maximum efficiency while maintaining minimum motor horsepower. Units are completely factory assembled and tested and supplied with one receiver, one water make-up valve, one gauge glass and specified number of pumps. Available in a wide range of sizes, these U.S. made pumps have just the right accessories and options to meet your unique needs.
Sterlco Boiler Feed Pumps set new standards of performance. Reliable and efficient, each unit features heavy gauge, 3/16 in. steel receivers for long operating life. Sterlco's energy efficient design, proven performance is the right size for your application. Reliable and efficient, each unit features heavy gauge, 3/16" steel receivers for long operating life. In addition, 3450-RPM motors assure maximum efficiency while maintaining minimum motor horsepower. Available in a wide range of sizes, these U.S. made pumps have just the right accessories and options to meet your unique needs.