- Request A Quote
- 1-800-668-3979
TurbiTechw² D-ISO Turbidity Sensor
The TurbiTechw² D-ISO Sensor has been specifically designed to monitor final treated, potable and filter water. The sensor is extremely sensitive and is capable of discriminating changes in Turbidity of less than 0.01NTU and is ISO7027 compliant. The 90º light scatter monitoring technique makes the sensor sensitive to a wide range of particle sizes, Accuracy ± 2% of reading or 0.02 NTU whichever is greater for range 0- 30 NTU and ±0.1 NTU whichever is greater for range of 0-200 NTU.
In-Situ AquaTROLL Multiparameter Sensor
The In-Situ AquaTROLL is a cost effective multiprobe that integrates with plant control systems for long term installation using a local controller, direct connection or wireless telemetry. With interchangeable sensors, the probe replaces multiple instruments, reducing overall monitoring costs. PARAMETERS • Dissolved Oxygen (RDO) • Turbidity • Total Suspended Solids • Temperature/Conductivity • Pressure • Level • Salinity • pH/ORP • Nitrate (NO3-) • Rhodamine WT Fluorescence Intensity • Ammonium (NH4+) • Chloride (Cl-) • Blue Green Algae-Phycocerythrin
TurbiTechw² HR - Self cleaning Suspended Solids Sensor
Range 0 - 50,000 mg/l. The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration phase. Membrane Bio Reactors (MBR) typically run with MLSS values in the region of 8,000 to 14,000 mg/l. High MLSS concentrations promote numerous process benefits, including stable operation, complete nitrification, and reduced biosolids production reducing biological volume requirements (and associated footprint) to only 20-30 percent of conventional biological processes.
TurbiTechw² LA Suspended Solids Sensor
Self Cleaning Suspended Solids Sensor Range: 0 - 20,000 mg/l The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and suspended solids or turbidity. The fully automatic self cleaning system ensures that manual intervention on a routine basis is not required.
Partech TurbiTechw² LS - Suspended Solids or Turbidity
The TurbiTechw² LS Sensor is designed to monitor the levels of suspended solids or turbidity typically found in final effluent from municipal and industrial wastewater treatment plants. It is also great at monitoring solids in the intake to both effluent and drinking water treatment processes. Available Ranges: 0 - 100 NTU, 0 - 500 NTU, 0 -1000 NTU. Monitoring of these key parameters requires sensors that are reliable and accurate, the TurbiTechw² LS meets this requirement perfectly. The large optical surfaces and sample volume ensure that the information provided by the sensor is both representative of the process and tolerant of fouling. In addition, the sensor incorporates a self cleaning mechanism that ensures that the optical surfaces are kept clean at all times, the cleaning system is designed to avoid problems with ragging and does not smear the optical system.
Mobrey MSM400 Ultrasonic Suspended Solids Monitoring System
The Mobrey MSM400 system continuously monitors the suspended solids or sludge density contained in, or flowing from, a clarifier or settlement tank during de-sludging. Many years of practical experience have shown that measurement of ultrasonic attenuation in a slurry is directly proportional to the percentage of suspended solids.The MSM400 system uses this principle to produce a digital display of the suspended solids measurement.
7300w² Monitor (Analytical Transmitter)
The 7300w² Monitor is the core product in the WaterWatch² range. The monitor is designed to interface with all of the sensors in the WaterWatch² range. The monitor specification provides all the connections required for 1 or 2 sensors, systems can be created by the use of expansion boxes to include multiple sensors. The maximum number of sensors will be limited by the practicalities of most sites. We anticipate 8 being a sensible maximum although many more can be accommodated.