- Request A Quote
- 1-800-668-3979
Bestobell Aquatronix, we know flow measurement
At Bestobell Aquatronix, we know that flow measurement is not a one-size-fits-all business—that’s why we will spend time with you to ensure that our flow measurement systems meet your unique needs. We are the only dedicated airflow solutions provider with expertise in thermal dispersion, differential pressure, and static difference across a fixed resistance measurement technology. We know from experience that we must always apply the right technology to the right application. Check out our full product lineup in our Family of Products brochure.
Fox Model FT1 Thermal Mass Flowmeter
The Fox Model FT1, winner of the 2015 Flow Control Innovation Award and the 2015 Processing Breakthrough Product Award, is the newest Thermal Gas Mass Flow Meter offered from Fox Thermal Instruments. The Model FT1 is a multiple award winner due to its innovative design elements such as the DDC-Sensor™ technology platform that allows it to operate using the Gas-SelectX® gas menu selection tool. Calibration Validation with the CAL-V™ feature. Insertion probes (for 1.5" - 70" pipes); Inline flow bodies with NPT ends (¾" - 3" pipes); Inline 150 lb. Flanged flow bodies (¾" - 6" pipes)
Ultrasonic Energy Meter
SonoPro® Commercial Series is a wall-mount, clamp-on, or insertion type ultrasonic flow meter using transit time technology to accurately meter clean liquids with little to no air bubbles or particles. Clamp-on type ultrasonic flow meters are easy to install and do not require shutting down or cutting the pipe, saving you time and money. Insertion type ultrasonic flow meters allow measurement of pipes that are not compatible with the clamp-on type. SonoPro flow meters are available with clamp-on RTD temperature sensors. Using these temperature measurements, the meter is able to perform the necessary calculations to provide a reliable (BTU) energy measurement.
Pro-V™ M22 Multivariable Flowmeter (Inline)
VorTek Instruments’ Pro-V™ multivariable flowmeters utilize three primary sensing elements–a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer–to measure the mass flow rate of gases, liquids and steam.
Pro-V™ M23 Multivariable Flowmeter (Insertion)
Insertion vortex meters measure flow by detecting the local velocity at a strategically located position within the pipe. Our Pro-V™ Model M23 detects the frequency at which vortices are shed from the bluff body located within the sensor head and then converts this to a volumetric flow in the electronics. The Pro-V™ Model M23 also uses the local velocity, along with other parameters, such as fluid type, pipe size and Reynolds number to calculate the average pipe velocity, and consequently, the volumetric flow rate.
Vortek SONOPRO® Model U43 Water Series Ultrasonic Flow Meter
SONOPRO® Model U43 Economical Commerical/HVAC Ultrasonic metering solutions for water application. The clamp on ultrasonic meter is a non-invasive solution to your metering needs. The clamp on features allows you to easily install a metering solution anywhere in the facility. Since these are attached to the outside of the pipe, they can be easily relocated without having to shut down your process. The U43 can provide energy measurements in BTU for various water applications.
GWF Sonico Edge - THE WORLD’S MOST ADVANCED ULTRASONIC FLOWMETER
GWF 4D technology® measures best in class high and low flows, Immediate detection of leakages and network errors, suitable for fire flow. No straight runs needed even with 90 ° elbows, valves or pumps. Bidirectional flow measurement.. For Water measurement applications such as drinking water orutility water (reservoirs, pumping stations, etc.) Suitable for difficult installation conditions such as placement directly before or after 90 ° elbows, valves or pump.
PIT - Insertion Magnetic Flow Meter with Optional Extraction Device
The PIT Probe-Type Insertion Magnetic Flow Meter is designed to measure the flow velocity of conductive liquids in large diameter pipes. The insertion-style design makes it cost-effective for larger lines in comparison to large inline magnetic flow meters from the aspect of purchase price as well as installation cost. This is because the insertion-probe design requires just a single bore hole in the side of the pipe instead of requiring an entire pipe section to be removed and reconfigured like inline magnetic flow meters. Insertion magnetic flow meters also require sigificantly less material for construction and are not as costly to ship as they are smaller than large inline flow bodies, leading to cost savings.