imgtab

Scanjet fixed and portable tank cleaning equipment

For any marine and offshore application, Scanjet designs and produces a full range of fixed and portable tank cleaning equipment, anti-pirate water cannons and gas freeing fans.? Scanjet’s product range is suitable for use in a wide variety of installations from small chemical carriers and product tankers to large VLCC and ULCC crude oil tankers.

Specification Link

imgtab
imgtab

Marine Smart Cell Bilge Alarm - Simultaneously monitor fuel oil, diesel and emulsions

The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of three oil types: fuel oil, diesel and emulsions. By utilising the Smart-Cell Detector Array Technology, developed by Rivertrace, the Bilge Alarm analyses all three oil types simultaneously without the need for re-calibration. Since optical cell fouling is recognised as a leading cause of monitor malfunction or incorrect reading a manual cell cleaning device is included as standard to simplify routine maintenance. By simple operation of the manual clean device, the Smart-Cell remains in optimum operating condition.

Specification Link

imgtab
imgtab

Scanjet SC F150W Water Driven Gas Freeing Fan

The Scanjet SC F150W Portable Water Driven Gas Freeing Fan is suitable for use on all sizes and types of vessels. The fan is designed as a High Performance, Deep Penetration Unit. Constructed from Stainless Steel and Aluminium it is lightweight and easily moved around the deck.

Specification Link

imgtab
imgtab

Rivertrace Smart ODME - Monitor, record and control ballast discharge to MEPC 108(49) requirements

The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge in accordance with the requirements of MEPC 108(49). Discharge limits are set at 30 litres per nautical mile, and the total discharge is expressed as a proportion of the previous cargo for dirty ballast. The requirements of the MARPOL Convention are that all oil tankers with a gross tonnage of 150 GRT and above must have an oil discharge monitoring and control system installed, incorporating an approved oil content meter, with a starting interlock and an automatic overboard valve control system. The Smart ODME includes all components required to meet MEPC 108(49) and is designed for ease of installation and maintenance. The requirements in IMO Resolution MEPC 108(49) apply to tankers with a date of keel laying or equivalent stage of construction of 1st January 2005 or later.

Specification Link

imgtab
imgtab

Victor Marine Oily Water Separators

The CS Series Oily Water Separator units are suitable for use on board vessels such as chemical, oil and product tankers, passenger and RO-RO ferries, workboats, offshore service vessels, warships, cruise ships, superyachts and fast patrol craft. Our units are used to separate oil from bilge water to the required international standard of 15 ppm (parts per million) oil content before discharge overboard and to maintain a cleaner marine environment, aiding the preservation of marine life throughout the world’s oceans and seas.

Video Link

Specification Link

imgtab