Sense

Measure

Control

Toll Free: 1-800-668-3979

Our goal is to provide the best technological solution for your application supported by unsurpassed technical support and service!

Member of

   Products for the Water & Waste Industry

Datasheets for download

Water

and Wastewater

Process

Control

Water

and Wastewater

Process

Control

Water

and Wastewater

Process

Control

Water

and Wastewater

Process

Control

Dissolved Oxygen

Turbidity/Suspended Solids

On-line Water Analyzer (Nitrates)

For the measurement of Ammonia, H2S, COD (UV 254), Nitrate, Hydrocarbons, Phosphates, Chlorophyll A, color, pH/ORP, dissolved Oxygen, conductivity and turbidity. the UV 400 is based on UV spectroscopy for the main parameters (ammonia, H2S, COD, hydrocarbons, nitrate). pH, conductivity and dissolved oxygen are measured using external probes

Portable Multi-Parameter Measurement and Recording System:

For pH, ORP, Conductivity, Turbidity, Suspended Solids and Dissolved Oxygen.

Features include: collecting and recording up to 100 measuring points, easy set-up menu, Data read-out in Excel format using the integrated RS232 interface, single, interval and continuous measurement, 4 hour battery capacity, robust water-proof case, and a large range of accessories.

Sludge Blanket Interface Level Transmitter - Ultrasonic

The Bestobell Markland BMSL 602 uses the sonar principle, with an ultrasonic pulse transmitted under the water, Sophisticated echo processing allows the MSL 600 to analyze the pulse of ultrasound which transmits vertically and reflects from the surface of the sludge blanket. The system captures the ultrasonic echoes reflected from the blanket below. Knowing the speed of sound in the supernatant, the depth of the sludge blanket is then determined from the time of flight of the echo.

Ultrasonic Level TransmittersT

Finetek offer a complete range of ultrasonic measurement capabilities, from sealed transmitters for sump applications to complete indicating sensors with remote control and indication.

Hydrostatic Level Transmitters

PSM Series 260 Hydrostatic level transmitters utilize the proven measurement principle of a pressure sensitive diaphragm with LVDT sensing. Diaphragms are produced in corrosion resistant alloys and are offered in a number of nominal ranges. Diaphragm travel is limited by mechanical design, providing unmatched tolerance to high overload and shock conditions.

Radar level Transmitters

Reflex non-contact models offer the unique Tank Bottom Following (TBF) mode in all the VG Series enables products with dielectric constants as low as 1.1 to be measured. For process vessels with complex internal structures the unique Empty Tank Spectrum (ETS) can be utilised to damp out all unwanted reflections from pipes, pumps and agitators

Ultrasonic Flowmeters

The Katronics flow meters are ideally suited to dirty or clean liquids. The measurement of flow is based on the principle the sound waves are influenced by a flowing medium. Measurements are made by penetrating the pipe wall with ultrasound and subsequent time differences, frequency variations and phase shifts of the ultrasonic signals are evaluated. The measuring technique has no effect on the flowing liquid. There is no pressure loss in the pipe and no wear on components of the measuring device.

The ultrasonic sensors are clamped onto the outside of the pipe, thus eliminating the need to interrupt the process.

Magnetic Flowmeters

The RPmag62 flow meter is suitable for use in many industries including chemical, power generation and distribution, mining, water treatment, pulp and paper, pharmaceutical, food and environmental protection. There are no moving parts in the measuring tube and there is no pressure loss. The RPmag62 flow meter has a wide measuring range and is available with a choice of wetted materials and linings to suit a wide range of applications.

Venturi Nozzle Elements and Open Channel Flow

The venturi nozzle is a hydraulic measuring element for precise flow measurement. With an insertable short venturi it is possible to detect low quantities of flow by measuring the flow height. Measuring the height is accomplished using an ultrasonic level system which calculates the flow volume.

Sensors and Accessories for pH, ORP/Redox:

Dynaprobes are severe service, robust probes that feature the unique and patented "Ion Traps" which capture and retain contaminating Ions. This prevents sensor poisoning and provides for a longer and trouble free operating life to pH and ORP sensors. A wide range of mounting options are available and all incorporate a temperature sensor for thermal compensation.

A range of lighter service sensors are also available for less demanding applications and laboratory use.

Conductivity Sensors and Accessories

Ion Specific Sensors